Ulkosaumojen tiivistys meriteollisuudessa
Saumamassat ulkosaumojen tiivistykseen
Sääolosuhteiden ja meriveden vaikutuksia vastustava saumamassamme Sikaflex®-591 soveltuu lähes kaikenlaisiin tiivistyksiin: se on monikäyttöinen, joustava merisaumamassahybridi, joka kiinnittyy erittäin hyvin kaikkiin veneenvalmistuksessa käytettäviin, standardoituihin valmistusmateriaaleihin. Sen häikäisevä elastisuus varmistaa kestävän ja pitkäikäisen tiivistyksen muiden Sikaflex® Marine tiivistysmassojen ja liimojen tapaan. Sikaflex®-295 UV on 1-komponenttinen, helppolevitteinen ja suurielastomeerinen tiivistysmassa.
Tiivistyskohteet
Ketjulevyt
Kansiraudakkeet ja metalliosat
Luukut
Lastausaukot yms.
Tuotesuosituksemme laivojen ja veneiden ulkosaumojen tiivistyksiin
Frequently Asked Questions
You will find different variations and materials for rub rails such as GRP, paints, wood and moulded PVC, etc. Therefore a good surface preparation is key. Products needed depending on the rub rail material to be bonded.
To ensure a good final result follow the advice given in the pre-treatment chart. Common product for rub rail bonding is our assembly adhesive for marine Sikaflex®-292i or the STP based marine sealant Sikaflex®-591.
For further details read our application guidelines and our pre-treatment chart.
Winches, windlasses are subject to high mechanical stresses, fans, hatches and hatch covers to low stresses. To make sure your fittings are sealed strongly we recommend the following:
Bedding and sealing of fittings subject to high mechanical stresses
Deck fittings such as chain plates, winches and guide rollers must absorb very high dynamic stresses. For this purpose, a high-performance product, Sikaflex®-292i, our assembly adhesive, should be used in conjunction with additional mechanical fixings.
Bedding and sealing of fittings subject to minimal mechanical stresses
Deck fittings, such as ventilators and cover strips, need to be waterproofed but are not subject to high tensile or torsion stresses.
These fittings can be effectively bedded and sealed with only Sikaflex®-291i or if the joint remains visible and is exposed to weathering, then use Sikaflex®-591 or Sikaflex®-295 UV.
Check pre-treatment chart for surface preparation of substrates prior to application and follow application steps according to application guidelines.
For further details read our application guidelines and our pre-treatment chart.